FD-1-50 Series
Seamless, pressure-resistant, and leak-proof freeze-drying chamber.
International brand compressor for stable quality and low noise.
Low noise and high ultimate vacuum.
Cold trap pre-freezing function.
Safe and stable hot gas defrosting method.
Compressor delay start function to protect the compressor.
Air circulation and flow technology to shorten drying cycles.
Sample temperature monitoring with real-time display.
Freeze-drying curve plotting function for viewing and storing freeze-drying curves.
Special sample cold trap low-temperature drying function.
Original imported inflation valve for nitrogen or inert gas storage after drying.
Industrial touch screen (7-inch) + industrial PLC, real-time recording and display of cold trap temperature curve, sample temperature curve, vacuum curve, and other data.
Freeze-drying data display and storage function, supporting USB data export for convenient freeze-drying process analysis.
Specification
Model | FD-1A-50+ | FD-1B-50+ | FD-1C-50+ | FD-1D-50+ | FD-1E-50+ |
Capacity | Flat Tray | Pressure Tray | Hanging Flat Tray | Hanging Pressure Tray | T-Type Manifold |
Freeze-drying area | 0.12㎡ | 0.08㎡ | 0.12㎡ | 0.08㎡ | ------ |
Vial capacity | ------ | ------ | 100/250/500/1000ml*2 | 100/250/500/1000ml*2 | ------ |
Tray size (mm) | ∅200*4 | ∅180*3 | ∅200*4 | ∅180*3 | ------ |
Control method | PLC + Touch Screen |
Condenser temperature (℃) | ≤-55 |
Cooling rate | ∅220*130 |
Defrosting method | < 6Pa |
Vacuum degree | 3L |
Trap capacity | 2L/24H |
Sublimation capacity | 7/8HP |
Compressor power (BIOVAC) | 2L/S |
Power 220V/50Hz | 850W |
Dimensions (mm) | W350D600H345 (excluding casters), Packing size: φ250*H490 / T-type: H400 |
Control method | PLC + Touch Screen |
Condenser temperature (℃) | ≤-55 |
Choices of Model
Five basic configurations:
Standard type: suitable for loading bulk materials.
Pressure stopper type: suitable for loading materials in serum bottles.
Hanging bottle standard type: suitable for loading materials in externally hung bottles.
Hanging bottle pressure stopper type: suitable for loading bulk materials, bottled materials, and externally hung bottled materials.
T-type manifold: suitable for loading materials in externally hung bottles and ampoules.
Five types of samples that can be freeze-dried: aqueous solutions, suspensions, or pasty substances with an eutectic point temperature higher than -20°C.